3M 08458 pillar foam (NVH) is a two-part urethane foam material ideal for absorbing noise, vibration and harshness. It can be used as a replacement for OEM rigid nonstructural foam to fill cavities in automotive applications . This NVH foam comes in a 200 ml cartridge that expands to approximately 225 cubic inches foam volume, using manual & pneumatic 3M applicators.
Features:
- 3M 08458 Pillar NVH Foam becomes rigid after full cure for professional collision repair use.
- This can also act as a sound-deadening & vibration-reducing material in automobile applications.
- This 3M NVH foam shows expanding properties to effortlessly flow towards hard-to-reach cavities.
Compatible Accessories:
- 3M 08571 or 08117 Manual Applicators and 09930 Pneumatic Applicator: These applicators are used to squeeze the 3M NVH foam and apply it on required surfaces.
- 3M 08193 & 08194 Static Mix Nozzles: These nozzles fit over the 3M 08458 NVH foam to dispense over the desired area.
Frequently Asked Questions:
Q. What are the performance characteristics of 3M 08458 Pillar Foam NVH?
A. Typical performance characteristics at ambient air & substrate temperature of 73 degrees F (23 degrees C) are:
- Foam Time: 1 minute
- Work Time: 5 minutes
- Cure Time: 1 hour
Q. What do the two parts of 3M 08458 Pillar Foam NVH contain?
A. One part of this 3M 08458 Pillar NVH foam contains white-coloured Urethane while another contains amber / brown coloured curative liquid. Both these liquids turn solid only after mixing.
Q. What is the service temperature of this 3M 08458 Pillar Foam NVH?
A. -20 to 180 degrees F (-20 to 82 degrees C)
